Speak to our local UK support team via Phone, IG and Whatsapp. Details in the Footer!

CLOSE

Home
/
Axil Filling & Capping Directions

Axil Filling & Capping Directions

Axil All-In-One filling and capping directions for optimal performance

 

 

 

We’re not crazy about reading directions either. But, please read these!

Follow these directions to avoid leaks, clogs, and other issues. Failure to adhere to these practices may invalidate your warranty.

 

 

 

 

 

 

Axil Filling Directions

RECOMMENDED NEEDLE SIZE

IDEAL FILL TEMPERATURE

CAPPING TIME

16-20ga

 90°F/32°C (thinner oils) – 135°F/57°C (thicker oils) 3 mins or less (depending on viscosity)
 

 

  Insert a blunt tip 16 to 20g needle into one of the two filling holes on either side of the center airway. Caution: Do not allow oil to enter the center airway, it is in between the filling holes.
  90°F/32°C (thinner oils) | 135°F/57°C (thicker oils) The ideal fill temperature will allow for filling and capping before the oil saturates the atomizer.
  Oversaturation from hot filling, thin oils, and/or slow capping will cause flooding, clogging and leaking.
  Do not overfill your devices! Fill to a maximum of 2.05mL or 1.05mL depending on your configuration. Overfilling may cause seal bulging and will force fluid through the atomizer.
  Cap within 3 minutes after filling. We recommend a shorter period of time for thinner oils. Immediately after filling, cap the device with the mouthpiece until it’s fully seated.

 

PRO TIP:

DO NOT REMOVE THE SILICONE PLUG WHEN FILLING.

 

Axil Capping Directions

CAPPING TIME

CAPPING METHOD

MINIMUM CAPPING FORCE

MAXIMUM CAPPING FORCE

3 mins of less
(depending on viscosity)

 By hand or arbor press 15-17lbs (7-8kg) 55lbs (25kg)

 

 

  Make sure the mouthpiece is properly aligned and straight. Press the mouthpiece down vertically (not at an angle) using even pressure, until you hear a click.
  You can seat the mouthpiece by hand, but a light- duty arbor press and jig are recommended. Do not use a hammer or mallet. Pressing at an angle can lead to damage, improper sealing, leakage, and cracking of the device.
  If too much pressure is applied during capping, you can damage the cart or silicone end caps. Check the pressure carefully.
  You cannot remove the mouthpiece once it’s fully seated without damaging the device or the mouthpiece.
  Let your devices stand for between 30 minutes to 12 hours before using. During this time, the oil is priming the atomizer. More viscous oils will require more time.
 
NOTE: Do not use power chargers that output more than 5 volts/1 amp. These may damage the battery.
 

PRO TIP:

GENTLY PRESS DOWN THE LONG AXIL MOUTHPIECES TO ALIGN BEFORE CAPPING

Order Quantity
What are the your order quantities and MOQs? 
Order Quantity
What are the your order quantities and MOQs? 
Our order quantities are kept low where possible intentionally to help support our customers get their hands on top quality products. They are dependent on inner case size but are as low as 10 units for 510 batteries and 100 for cartridges. 
Our order quantities are kept low where possible intentionally to help support our customers get their hands on top quality products. They are dependent on inner case size but are as low as 10 units for 510 batteries and 100 for cartridges. 
Testing and Ordering
How fast does GSQ make deliveries?

How do I place a purchase order with GSQ?

How do I arrange to test GSQ Products and AVD hardware?

What brands do you work with?
Optional button
Testing and Ordering
How fast does GSQ make deliveries?

How do I place a purchase order with GSQ?

How do I arrange to test GSQ Products and AVD hardware?

What brands do you work with?
Optional button
GSQ maintains large stock levels in our UK warehouses. For stock orders, you will usually receive your supplies within 1-2 days depending on your location. For custom orders, you can count on delivery within ten - twelve weeks.

Please contact us via hello@gsq-trading.com or on 020 3287 8595 to place your order or enquire about samples. You can also connect via Instagram and other channels below.

You’ll probably recognise many of the brands we supply which have become household names, including Woodies, Vida Vapes and more. To see some of the brands we work with take a look over here.
Brands
GSQ maintains large stock levels in our UK warehouses. For stock orders, you will usually receive your supplies within 1-2 days depending on your location. For custom orders, you can count on delivery within ten - twelve weeks.

Please contact us via hello@gsq-trading.com or on 020 3287 8595 to place your order or enquire about samples. You can also connect via Instagram and other channels below.

You’ll probably recognise many of the brands we supply which have become household names, including Woodies, Vida Vapes and more. To see some of the brands we work with take a look over here.
Brands